contestada

Fluid mechanicsbuckingham pi theoremQ5. At a sudden contraction in a pipe the diameter changes from D1 to D2. The pressure drop, Δp , which develops across the contraction is a function of D1 and D2, as well as the velocity, V, in the larger pipe, and the fluid density, rho, and viscosity, µ. Use D1, V, and µ as repeating variables to determine a suitable set of dimensionless parameters. Why would it be incorrect to include the velocity in the smaller pipe as an additional variable?Thank you!!!

Respuesta :

Answer:

A) set of dimensionless parameters is; (Δp•D1)/Vµ = Φ((D2/D1), (ρ•D1•V/µ))

B) Yes, it will be incorrect to include the velocity in the smaller pipe as an additional variable.

Explanation:

First of all, let's write the functional equation that lists all the variables in the question ;

Δp = f(D1, D2, V, ρ, µ)

Now, since the question said we should express as a suitable set of dimensionless parameters, thus, let's write all these terms using the FLT (Force Length Time) system of units expression.

Thus;

Δp = Force/Area = F/L²

D1 = Diameter = L

D2 = Diameter = L

V = Velocity = L/T

ρ = Density = kg/m³ = (F/LT^(-2)) ÷ L³ = FT²/L⁴

µ = viscosity = N.s/m² = FT/L²

From the above, we see that all three basic dimensions F,L & T are required to define the six variables.

Thus, from the Buckingham pi theorem, k - r = 6 - 3 = 3.

Thus, 3 pi terms will be needed.

Let's now try to select 3 repeating variables.

From the derivations we got, it's clear that D1, D2, V and µ are dimensionally independent since each one contains a basic dimension not included in the others. But in this case, let's pick 3 and I'll pick D1, V and µ as the 3 repeating variables.

Thus:

π1 = Δp•D1^(a)•V^(b)•µ^(c)

Now, let's put their respective units in FLT system

π1 = F/L²•L^(a)•(L/T)^(b)•(FT/L²)^(c)

For π1 to be dimensionless,

π1 = F^(0)•L^(0)•T^(0)

Thus;

F/L²•L^(a)•(L/T)^(b)•(FT/L²)^(c) = F^(0)•L^(0)•T^(0)

By inspection,

For F,

1 + c = 0 and c= - 1

For L; -2 + a + b - 2c = 0

For T; -b + c = 0 and since c=-1

-b - 1 = 0 ; b= -1

For L, -2 + a - 1 - 2(-1) = 0 ; a=1

So,a = 1 ; b = -1; c = -1

Thus, plugging in these values, we have;

π1 = Δp•D1^(1)•V^(-1)•µ^(-1)

π1 = (Δp•D1)/Vµ

Let's now repeat the procedure for the second non-repeating variable D2.

π2 = D2•D1^(a)•V^(b)•µ^(c)

Now, let's put their respective units in FLT system

π1 = L•L^(a)•(L/T)^(b)•(FT/L²)^(c)

For π2 to be dimensionless,

π2 = F^(0)•L^(0)•T^(0)

Thus;

L•L^(a)•(L/T)^(b)•(FT/L²)^(c) = F^(0)•L^(0)•T^(0)

By inspection,

For F;

-2c = 0 and so, c=0

For L;

1 + a + b - 2c = 0

For T;

-b + c = 0

Since c =0 then b =0

For, L;

1 + a + 0 - 0 = 0 so, a = -1

Thus, plugging in these values, we have;

π2 = D2•D1^(-1)•V^(0)•µ^(0)

π2 = D2/D1

Let's now repeat the procedure for the third non-repeating variable ρ.

π3 = ρ•D1^(a)•V^(b)•µ^(c)

Now, let's put their respective units in FLT system

π3 = F/T²L⁴•L^(a)•(L/T)^(b)•(FT/L²)^(c)

For π4 to be dimensionless,

π3 = F^(0)•L^(0)•T^(0)

Thus;

FT²/L⁴•L^(a)•(L/T)^(b)•(FT/L²)^(c) = F^(0)•L^(0)•T^(0)

By inspection,

For F;

1 + c = 0 and so, c=-1

For L;

-4 + a + b - 2c = 0

For T;

2 - b + c = 0

Since c =-1 then b = 1

For, L;

-4 + a + 1 +2 = 0 ;so, a = 1

Thus, plugging in these values, we have;

π3 = ρ•D1^(1)•V^(1)•µ^(-1)

π3 = ρ•D1•V/µ

Now, let's express the results of the dimensionless analysis in the form of;

π1 = Φ(π2, π3)

Thus;

(Δp•D1)/Vµ = Φ((D2/D1), (ρ•D1•V/µ))

B) In continuity equation,

Q1 = Q2

Thus,

ρV1A1 = ρV2A2

And so,

V1A1 = V2A2

V2 = (V1A1)/A2

Since area = πD²/4

Thus,V2 = (V1D1)/D2

Now, V2 is the velocity of the smaller and is dependent on V1, D1 and D2.

Thus, it will be incorrect to include the velocity in the smaller pipe as an additional variable.

Otras preguntas